 |
 |
 |
|
Weramic 2 1/4" Porcelain Ceramic Core Bit for Dekton, Lapitec, Neolith, and other large format Porcelain Panels
Weha Weramic 2 1/4" x 5/8-11 Core bit has been designed specifically for large porcelain panel and Ultra compact sintered stone material such as Dekton, Lapitec, Neolith, Laminam, etc.
The Weha Weramic porcelain and ceramic core bits work excellent on all ceramic products such as floor tile and wall tile.
The Weramic porcelain core bits have been built to core perfectly smooth, chip free holes on all thickness materials from 6mm, 8mm,10mm, 12mm 20mm, and 30mm.
The Weha Weramic porcelain and ceramic core bits have only a 2mm thick rim. These thin wall core bits will drill very clean and fast through the porcelain and ceramic materials.
The Weha Weramic porcelain and ceramic core bit is one of the best Dekton, Lapitec, or Neolith core bits that you can drill holes with.
Weha Weramic Porcelain and Ceramic Core Bit Specifications:
Wet or dry on material up to 6mm material
Wet only for material thicker than 6mm
Total length: 3 1/8"
Drilling depth: 1 7/8"
5/8-11 Thread
Recommended RPM: between 1600-2800 rpm
|
|
|
 |
|
 |
|