Quartzite Color Glaxs 215 ML
Quartzite Color Glaxs 215 ML is made of two previously dosed components. This multipurpose Quartzite Color Glaxs 215 ML is produced in a special cartridge ratio 2+1, with 2 tubes and a mixer which allows the correct extrusion of the product very easily. Once inserted in a proper gun with 2 pistons, the product is ready for use.
Quartzite Color Glaxs 215 ML is suitable to glue and to mend:
- Onyx
- Marble
- Solid Surface
- Quartz
- Ceramic
- Granite
- Porcelain
- Limestone
- Travertine
- Stone
This adhesive can also be used to bond different materials together such as:
- Marble-Marble
- Marble-Granite
- Stone-Ceramic
Compatible With Many Products
Glaxs is a versatile adhesive and it is not only color matched to various colors of materials, but it also is compatible with many kinds of surfaces, including these 25 popular producers:
- Atlas Concorde
- Meganite Surfaces
- La Fabrique
- Solid Products
- Unistone
- Mason Quartz
- Cimstone
- CRL
- Gemini Acrylic
- Kerrock
- Fugen Quartz Surfaces
- Centura
- Abet Laminati Pral
- Gemini Quartz
- Bloom Stone
- Northstar - Acrylic
- Versatop
- Novanite
- Q from MSI
- Herostone
- Tristone
- Quartz Natur
- Durasein
- Swanstone
- Spectrastone
Suitable for indoor and outdoor use.
Instructions for Use:
- All the surfaces to be treated must be cleaned and free of dust and grease.
- In case of glossy and/or smooth surfaces, we suggest to scrub the surfaces with sandpaper before gluing.
- Remove the threaded extremity and uncap the cartridge.
- Fix the mixer to the cartridge through the threaded nozzle.
- Before applying the glue on the surfaces, do spurge around 5 cm in line.
- Use only guns approved by Tenax, MK Sulzer ratio 2+1 H236M and Mixpac DM200-01 ratio 2+1.
- After usage, clean the nozzle, replace the cap and discard the mixer after use. Product will not set below +1°C.
Shelf Life:
The products in cartridge will last at least 18 months in the pack and 12 months out of pack, in normal conditions between 18-25°c, kept away from source of heat, humidity and sun light.
Working Specs
- Gel time in bulk at 77°: 3-5 min
- Tacky free time at 77°: approx. 15 min
- Working time at 77°: 45-60 min
- Temp range for use after hardening: -13°F to 140°F
Technical Information
| Technical Data for Glaxs Quartzite |
|---|
| Viscosity cps 25°C 20 r.p.m (ASTM D2196) | tixotropic liquid |
| Density at 25°C gr/cm3 | 1.27 |
| Aspect | colored liquid |
| Ratio of use glue/hardener | 2+1 |
| Gel time (in bulk) at 25°C in min | 3-5 min |
| Time for handling pieces | 15-20 min |
| Working time suggested at 25°C in min | 45-60 min |
| Minimum reaction temperature | +1°C |
| Minimun temperature of use after hardening | -25°C |
| Minimun temperature of use after hardening | +60°C |
| Shelf life at 18-20°C | 24 months |
| Adhesion force in MPa at 25°C on natural stone, diamond cut surface after 1 hour (ASTM D 4541)* | 9.0 - 10.0 |
| Adhesion force in MPa at 25°C on natural stone, diamond cut surface after 24 hours (ASTM D 4541)* | 9.5 - 10.5 |
| Adhesion force in MPa at 25°C on quartz, diamond cut surface after 1 hour (ASTM D 4541)* | 9.0 - 10.0 |
| Adhesion force in MPa at 25°C on quartz, diamond cut surface after 24 hours (ASTM D 4541)* | 12.0 - 13.0 |
| Adhesion force in MPa at 25°C on ceramic, diamond cut surface after 1 hour (ASTM D 4541)* | 9.0 - 11.0 |
| Adhesion force in MPa at 25°C on ceramic, diamond cut surface after 24 hours (ASTM D 4541)* | 10.0 - 13.0 |
| Quartzite Technical Data Sheet |