Home > Router Bits > Oma Router Bits > Oma Router Bit F Ogee 2 cm & 3 cm >

Finishing Wheel Extradiam F 2cm diamond pos 3
Finishing Wheel Extradiam F 2cm diamond pos 3
 
Alternative Views:
Price: $269.75


Product Code: 8045
Qty:

DESCRIPTION
 
OMA Extradiam position 3 profile router bits are Extra fine diamond profile wheels that starts the polishing process on all types of stone.
By not having a bearing, the bit is the bridge between the profiling and polishing wheels. This polishing phase bit plays the critical role in the edge polishing process.
Oma Extradiam is designed with a steel core with extreme high tolerance profile accuracy. Then the same perfection of extra fine abrasive diamond powder is applied at a very high density.
The result is an extremely strong, durable, and perfect wheel that that achieves an excellent extra fine diamond finish that will seamlessly lead into the 3 OMA polishing wheels.
If you want to stop at this phase and start hand polishing, A 400 or 800 grit Schein pads or start with the Weha Hybrid 2 pad.
Designed with a steel core and extra fine diamond poweder, the OMA Extradiam is:
1) The Critical bit between the profile and polishing phase of the OMA system of bits
2) The first bit without a bearing to fully engage the stone in the polishing process
3) Optimum bit before starting the OMA polishing wheels or start with hand polishing.
Recommended RPM: 2500-3500. Optimum RPM 3000
Additional features of the OMA Prodiam Router Bit:
Pure quality: Oma Bits are produced in Italy, by OMA, with OMA controlling 100% of the quality of production. This Guarantees that every bit will meet the standards that OMA routers need to be at 100% optimum performance. No outside third party to meet OMA standards.
Center Water Feed: Oma bits offer center water feed so that there is always continuous water on the bits to guarantee no accidental "dry cut" and affecting the bit or the stone.



Rate this product. Be the first to write a review »