 |
 |
 |
|
Outstanding life and smooth finish on marble, granite, quartz, engineered stone.
What makes the OMA position 1 profile bits worth the extra money?
Alot of reasons!
1) The typical diameter of router bits on the market today are about 2 3/4" in diameter. Oma bits have stayed true the the size of bits that we all used to get. At almost 3 1/2" in diameter, OMA is offering 30% more diameter diamond than the less expensive profile bits.
2) The larger diameter changes the Surface feet per minute of profiling. That means that the smaller diameter router bits will not cut as fast as the OMA bits will cut because of the smaller diameters.
3) Pure quality: Oma Bits are produced in Italy, by OMA, with OMA controlling 100% of the quality of production. This Guarantees that every bit will meet the standards that OMA routers need to acheive 100% optimum performance. No outside third party to meet OMA standards
4) Pos 1 bits are produced with solid brass. This costs more than the cheap metals. But there is a great reason behind it. OMA pos 1 brass bits are designed to last for many years. Oma produces the position 1 replacement segment kits. These replacements are the same as the original diamond segments that come with the position 1 bit. It also comes with replacement washers, bolts, and the bearing. Simply unscrew the segments away from the brass and install the complete new replacement segments. Now you have a brand new bit at 40% of the original cost and equal to the cheaper router bits on the market, but receiving premium quality.
5) Center Water Feed: Oma bits offer center water feed so that there is always continuous water on the bits to guarantee no accidental "dry cut" and affecting the bit or the stone.
6) NO Thermic Stress: OMA bits do not receive thermic stress from the welding process, as other position 1 bits have to go through. This guarantees very long life, even wear, and a very smooth finish.
7) Smooth Finish: Although segmented, OMA position 1 bits will always leave the stone smooth, chip free, and ready for pos 2 profile bits or hand polishing. When you watch the video of these bits work, you really see how well these perform.
8) 30%-50% savings: Due to the quality and longevity of these position 1 bits, you will find a savings between 30%-50% over a 1 year period compared to the current smaller diameter cont rim bits that are on the market now.
|
|
|
 |
|
 |
|