 |
Magnesium 215 ML 2:1 Cartridge GlueGlaxs Magnesium is a high adhesion system for indoor and outdoor bonding of Travertine, Onyx Countertops, Quartzite, Natural Granite, Limestone, and similar surfaces. Glaxs is available in a wide variety of colors. Requires use of special M200XMR Cartridge Gun. Product CompatibilityMagnesium is one color of many Glaxs colors. Each color of Glaxs is a versatile adhesive and it is not only color matched to various colors of materials, but it also is compatible with many kinds of surfaces, including these 25 popular producers: - Icestone
- Vicostone
- Kalinga Stone
- Marazzi
- Xtone
- Atem
- Maia
- Lido
- Metroquartz
- Belenco
- Unistone
- Polystone
- Polarstone
- Terrastone
- Sunstone
- Avanza
- Pinnacle
- Color Quartz
- Marmo Arredo
- Fondovalle
- Renewmax
- Stone Italiana
- One Quartz
- Quantra
- Giostone
Glaxs Advantages:- VOC free
- Excellent adhesion
- Ultra rapid
- Excellent color stability to sunlight
- Glossy, shiny and easy to polish
- Indoor and Outdoor use
- Pre-dosed for easy dispensing
- Comes with 2 mixing nozzles
Glaxs Magnesium Instructions for Use:- All the surfaces to be treated must be cleaned and free of dust and grease.
- In case of glossy and/or smooth surfaces, we suggest to scrub the surfaces with sandpaper before gluing.
- Remove the threaded extremity and uncap the cartridge.
- Fix the mixer to the cartridge through the threaded nozzle.
- Before applying the glue on the surfaces, do spurge around 5 gr in line.
- Use only guns approved by Tenax, MK Sulzer ratio 2+1 H236M and Mixpac DM200-01 ratio 2+1.
- After usage, clean the nozzle, replace the cap and discard the mixer after use. Product will not set below +1°C.
Shelf Life:Glaxs Magnesium in cartridge will last at least 12 months, in normal conditions between 18-25°c, kept away from source of heat, humidity and sun light. Safety Rules:Resin and hardener are chemical products, please read the safety data sheet before usage and the rules written on the product label. Working Specs- Gel time in bulk at 77°: 3-5 min
- Tacky free time at 77°: approx. 15 min
- Working time at 77°: 45-60 min
- Temp range for use after hardening: -13°F to 140°F
Technical Information| Technical Data for Glaxs Magnesium |
|---|
| Viscosity cps 25°C 20 r.p.m (ASTM D2196) | tixotropic liquid | | Density at 25°C gr/cm3 | 1.27 | | Aspect | colored liquid | | Ratio of use glue/hardener | 2+1 | | Gel time (in bulk) at 25°C in min | 3-5 min | | Time for handling pieces | 15-20 min | | Working time suggested at 25°C in min | 45-60 min | | Minimum reaction temperature | +1°C | | Minimun temperature of use after hardening | -25°C | | Minimun temperature of use after hardening | +60°C | | Shelf life at 18-20°C | 24 months | | Adhesion force in MPa at 25°C on natural stone, diamond cut surface after 1 hour (ASTM D 4541)* | 9.0 - 10.0 | | Adhesion force in MPa at 25°C on natural stone, diamond cut surface after 24 hours (ASTM D 4541)* | 9.5 - 10.5 | | Adhesion force in MPa at 25°C on quartz, diamond cut surface after 1 hour (ASTM D 4541)* | 9.0 - 10.0 | | Adhesion force in MPa at 25°C on quartz, diamond cut surface after 24 hours (ASTM D 4541)* | 12.0 - 13.0 | | Adhesion force in MPa at 25°C on ceramic, diamond cut surface after 1 hour (ASTM D 4541)* | 9.0 - 11.0 | | Adhesion force in MPa at 25°C on ceramic, diamond cut surface after 24 hours (ASTM D 4541)* | 10.0 - 13.0 | | Magnesium Technical Data Sheet |
|
|
|