 |
 |
 |
|
Pure White 215 ML 2:1 Cartridge Glue
Glaxs Pure White is a high adhesion system for indoor and outdoor bonding of
Quartz Surfaces, Porcelain, Quartz, Engineered Quartz, Natural Granite, and similar surfaces. Glaxs is available in a wide variety of colors. Requires use of special M200XMR Cartridge Gun.
Product Compatibility
Pure White is one color of many Glaxs colors. Each color of Glaxs is a versatile adhesive and it is not only color matched to various colors of materials, but it also is compatible with many kinds of surfaces, including these 25 popular producers:
- Rynone
- Sinqua Stone
- Trafficstone
- Crush
- Sunstone
- Kerlite
- Lexmar
- Geos
- Athenian Marble
- Essa Stone
- Novanite
- Centura
- Pompeii Quartz
- Ellipse
- Stone Italiana
- Nanoglass
- Xtone
- Francini Forte
- Basix
- Glass 2
- Piedrafina
- Zodiaq
- Formica Stone
- Bioprism
- MSI
Glaxs Advantages:
- VOC free
- Excellent adhesion
- Ultra rapid
- Excellent color stability to sunlight
- Glossy, shiny and easy to polish
- Indoor and Outdoor use
- Pre-dosed for easy dispensing
- Comes with 2 mixing nozzles
Glaxs Pure White Instructions for Use:
- All the surfaces to be treated must be cleaned and free of dust and grease.
- In case of glossy and/or smooth surfaces, we suggest to scrub the surfaces with sandpaper before gluing.
- Remove the threaded extremity and uncap the cartridge.
- Fix the mixer to the cartridge through the threaded nozzle.
- Before applying the glue on the surfaces, do spurge around 5 gr in line.
- Use only guns approved by Tenax, MK Sulzer ratio 2+1 H236M and Mixpac DM200-01 ratio 2+1.
- After usage, clean the nozzle, replace the cap and discard the mixer after use. Product will not set below +1°C.
Shelf Life:
Glaxs Kona White in cartridge will last at least 12 months, in normal conditions between 18-25°c, kept away from source of heat, humidity and sun light.
Safety Rules:
Resin and hardener are chemical products, please read the safety data sheet before usage and the rules written on the product label.
Working Specs
- Gel time in bulk at 77°: 3-5 min
- Tacky free time at 77°: approx. 15 min
- Working time at 77°: 45-60 min
- Temp range for use after hardening: -13°F to 140°F
Technical Information
|
Technical Data for Glaxs Pure White
|
|
Viscosity cps 25°C 20 r.p.m (ASTM D2196)
|
tixotropic liquid
|
|
Density at 25°C gr/cm
3
|
1.27
|
|
Aspect
|
colored liquid
|
|
Ratio of use glue/hardener
|
2+1
|
|
Gel time (in bulk) at 25°C in min
|
3-5 min
|
|
Time for handling pieces
|
15-20 min
|
|
Working time suggested at 25°C in min
|
45-60 min
|
|
Minimum reaction temperature
|
+1°C
|
|
Minimun temperature of use after hardening
|
-25°C
|
|
Minimun temperature of use after hardening
|
+60°C
|
|
Shelf life at 18-20°C
|
24 months
|
|
Adhesion force in MPa at 25°C on natural stone, diamond cut surface after 1 hour (ASTM D 4541)*
|
9.0 - 10.0
|
|
Adhesion force in MPa at 25°C on natural stone, diamond cut surface after 24 hours (ASTM D 4541)*
|
9.5 - 10.5
|
|
Adhesion force in MPa at 25°C on quartz, diamond cut surface after 1 hour (ASTM D 4541)*
|
9.0 - 10.0
|
|
Adhesion force in MPa at 25°C on quartz, diamond cut surface after 24 hours (ASTM D 4541)*
|
12.0 - 13.0
|
|
Adhesion force in MPa at 25°C on ceramic, diamond cut surface after 1 hour (ASTM D 4541)*
|
9.0 - 11.0
|
|
Adhesion force in MPa at 25°C on ceramic, diamond cut surface after 24 hours (ASTM D 4541)*
|
10.0 - 13.0
|
|
Pure White Technical Data Sheet
|
|
|
|
 |
|
 |
|