Shinex is a transparent, opalescent liquid silicone wax designed for a variety of hard surfaces. It enhances the original tone of the material and improves the finish of multiple surfaces. Treated surfaces benefit from reduced staining and increased fingerprint resistance, resulting in a silky, smooth finish with excellent gloss.
Shinex is a high-performance silicone wax that enhances the vibrancy of treated surfaces. It repels stains, increases fingerprint resistance, and leaves a smooth, glossy finish.
As a versatile product, Shinex is engineered for use on various surfaces commonly used in the industry. Fabricators apply Shinex on both engineered and natural stone surfaces, including:
Shinex is "finish friendly," suitable for a wide range of finishes. It can be used on smooth polished surfaces, rough rustic finishes, and even flamed finishes, making it ideal for treating diverse surface textures
Shinex is formulated for easy application. This liquid silicone wax can be applied using a brush, cloth, sponge, or sprayer. Its fluid properties ensure easy spreading or spraying on the surface of the material.
Application Instructions:
Shinex liquid silicone surface wax is designed for easy application. Follow these steps for optimal results:
- Test Before Use: Before treating the entire surface, test on a small, inconspicuous area.
- Clean and Dry: Thoroughly clean and completely dry the surface before applying.
- Apply Evenly: Use a cloth, brush, sponge, or sprayer to evenly apply a small amount. The surface should absorb the liquid within a few seconds.
- Absorb and Buff: Allow the material to absorb the liquid, then buff the treated surface with a clean cloth.
- Repeat Application: Wait 10-15 minutes and repeat the application process.
- Seal the Can: After use, close the can tightly to ensure it is sealed properly.
Note:
Ensure the surface is free of dirt and debris before application to achieve uniform coverage. Remove any excess product to avoid a superficial glossy and sticky film. For floors, do not walk on the treated surface for at least 24 hours after application.
Shinex Liquid Silicone Wax Coverage
One liter of Shinex can treat 20-30 m² of stone, depending on the stone's absorbency. The coverage rate is directly related to the material's porosity.
Storage of Shinex Liquid Silicone Wax
Under standard conditions, Shinex is guaranteed for 24 months when properly stored in the original, tightly sealed can, away from heat sources, humidity, and direct sunlight.