 |
 |
 |
|
Weramic 2 1/2" CNC Porcelain Ceramic Core Bit for Dekton, Lapitec, Neolith, and other large format Porcelain Panels
Weha Weramic 2 1/2" x 1/2 Gas CNC Core bit has been designed specifically for large porcelain panel and Ultra compact sintered stone material such as Dekton, Lapitec, Neolith, Laminam, etc.
The Weha Weramic CNC porcelain and ceramic core bits work excellent on all CNC machines such as Breton, Northwood, Park Industries, and other cnc machines.
The Weramic CNC porcelain core bits have been built to core perfectly smooth, chip free holes on all thickness materials from 6mm, 8mm,10mm, 12mm 20mm, and 30mm.
The Weha Weramic CNC porcelain and ceramic core bits have only a 2mm thick rim. These thin wall core bits will drill very clean and fast through the porcelain and ceramic materials.
The Weha Weramic CNC porcelain and ceramic core bit is one of the best Dekton, Lapitec, or Neolith CNC core bits that you can put on your cnc machine
Weha Weramic 2 1/2" CNC Porcelain and Ceramic Core Bit Specifications:
Total length: 3 7/8" (100mm)
Drilling depth: 1 7/8"
1/2 Gas male CNC Thread
Recommended RPM: between 1400-2800 rpm
Feed rate: between 3"-4" per minute
|
|
|
 |
|
 |
|